Touch Screen CONSTRUCTION

CONSTRUCTION

There are several principal ways to build a touchscreen. The key goals are to recognize one or more fingers touching a display, to interpret the command that this represents, and to communicate the command to the appropriate application.

In the most popular techniques, the capacitive or resistive approach, there are typically four layers:

1. Top polyester layer coated with a transparent metallic conductive coating on the bottom.

2. Adhesive spacer.

3. Glass layer coated with a transparent metallic conductive coating on the top.

4. Adhesive layer on the backside of the glass for mounting.

When a user touches the surface, the system records the change in the electrical current that flows through the display.

Dispersive-signal technology which  created in 2002, measures the piezoelectric effect — the voltage generated when mechanical force is applied to a material — that occurs chemically when a strengthened glass substrate is touched.

There are two infrared-based approaches. In one, an array of sensors detects a finger touching or almost touching the display, thereby interrupting light beams projected over the screen. In the other, bottom-mounted internal cameras record screen touches.

In each case, the system determines the intended command based on the controls showing on the screen at the time and the location of the touch.